Tips For Replacing a Window Handle
It is easy to replace your window handle in the convenience of your own home. Follow these handy tips for an easy operation and a beautiful appearance.
Start by removing the screw covers to reveal the screws within the uPVC window handle. Make sure you measure the spindle in order to make sure you're getting the correct size replacement.
1. Take a measurement of the Spindle Length
When you're replacing a window handle, it's important to get the size of the spindle correctly. It could affect the tightness or elasticity of the handle and whether the handle locks correctly into the frame of the window. The spindle is the metal shaft that connects to the handle and to the lock within the frame of the window. The spindle is available in either the standard 8mm cross-section for industry or older versions of 9mm. The modern industry standard is 8mm but this wasn't always the case. When buying a new handle it is essential to verify the dimensions.
The easiest method of measuring the spindle length is to remove the existing handle and this can be done by turning it to the open position, then unscrewing the two screws (which might be hidden behind plastic caps that have to be removed) that hold the handle. After removal, you can measure from the base of the handle to the end of the spindle. This will give you the measurement required to purchase a replacement.
There are many options available when you are looking to pick the right window handle. From sleek chrome that can fit into modern homes to traditional burnished bronze that looks great in restored Georgian rooms, or even the more classic Tudor Cottages with curled mongoose-tail latches. The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are usually fitted to uPVC windows and are always the same size with 43mm centres (2 fixings). Cockspur handles are available in a range of sizes, starting at 58mm to 62mm. Window handles from Cadenza are a different size again because they feature an angled blade that functions a multi-point locking mechanism inside the window.
When you are choosing a handle for your window, you should also consider the hand you use to open your door. Inline Espag window handles aren't handed and can be utilized on either left or right handed windows. Cranked window handles are hand-operated and are only used on windows that open in one direction.
2. Remove Repair My Windows And Doors
Whether the handle is damaged or worn out or simply worn out, a window handle that falls off is a major source of frustration. The good news is that you can repair the uPVC handle by yourself. You only need the most basic hand tools and time to complete the task.
You will need to first open the window, and then ensure that it's not locked. Next, you need to remove the screws that are holding the handle in position. Once the screw caps have been removed you will be able to take off the handle.
The handle is attached to a spindle in the window frame. Based on the type, this is secured by a screw or pin. The most popular handles are the inline Espagnolette and cockspur handles. Both of these types of handles are utilized on casement windows, including windows made of aluminium. They can be locked with keys to prevent the opening of the window from the outside or you can lock them by turning the handle clockwise.
To remove the handle, you will require a flat-bladed screwdriver. Once the clip is released, the handle will slide off the spindle. When the handle is removed, you will be required to measure the length of the spindle and ensure that your new handle is compatible with the spindle's length.
Once you have the correct size, you can now fix the new handle into place. You must make sure that the new handle is firmly fixed and is turning the correct way (clockwise for open or counterclockwise for closed). It is essential to make sure that the handle has not been placed upside down.
Finally, you should replace the screw cover caps. After you've done that, you can test the handle to ensure that it is working properly. It is also recommended to test the locking mechanism by moving the handle until it is locked position and then returning it to the locked position.
3. Remove the Screws
A uPVC window handle is an integral component of every home and is often the first item to exhibit signs of wear and tear or damage. This could be due natural elements, regular usage, or even deliberate damage by criminals looking to gain access to your home. A simple fix can resolve the issue and stop it from occurring again.
UPVC handles can be difficult to open if the locking mechanism isn't working properly. Most of the time, the issue can be resolved by replacing the multipoint lock instead of the entire handle and it's certainly worth checking this because it could save you money.
After you've removed the old handle, you'll need to take off the screws that held it in place. These are typically located on the inside of the base of the handle. It is possible to use a screwdriver do this. Be cautious not to over tighten the handle as this could cause it to become loose.
Then you will need to locate the screws or pins that keep the handle in place. These are likely to be found on the inside of the base of the handle. you'll need a screwdriver or a pair of pliers to remove the screws. After they've been removed, you'll have to replace the screw caps if you wish to do so, and then test the new handle to make sure it's working correctly.
Install the handle by aligning the spindle to the window's cutout mechanism. Then, screw it in. If you want to replace the screw covers, make sure the handle is in a position that is open and that the screws are securely secured. Once this is complete you're all done and you can enjoy your newly replaced window handle. I hope this will enable you avoid the need for expensive replacement of your door and window in the future. If you would like more help with this or any other aspect of your uPVC windows don't hesitate to get in touch with us.
4. Fit the New Handle
The process of replacing a broken window handle or updating it is easy and can be completed within only a few simple steps. The most important thing is to identify the kind of handle, measure its spindle and identify the tools you'll need to complete the task. Always prioritise safety when working with windows and tools. Make sure you follow the steps and ensure that you have an appropriate handle for use.
To begin, locate the screws that hold the window handle in place. Remove them while firmly holding the handle to prevent it from falling and causing an injury. Once the screws are removed, you can put them in a safe place to be replaced in the future.
After removing the old handle, you can now begin to install your new one. The handle should be perfectly positioned for it to function properly and keep the window in its closed position. The next step is to slide the square metal bar to the back of the handle into the hole in the window mechanism, making sure it is secure.
After the new handle is in place, the final thing to do is replace the caps on the screws and test it to make sure it works. If you aren't satisfied with the results, or the window doesn't shut or open properly contact our experts for assistance.
The majority of UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point because of damage or wear. Anyone with some DIY knowledge can carry out the process. The most important factor in the success of the process is to ensure that you're using a replacement handle that matches the existing window in terms of dimensions and style. If you're unsure about what type of handle you require, don't hesitate to contact our team who will be able to provide you with the possibilities available.